New Mexico Advance Water Operator Certification Practice Test – All Questions

Browse all practice questions for the New Mexico Advance Water Operator Certification Practice Test. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

Start practice test Flash cards

How population size determines the required water level in treatment plantsWhich factor primarily determines the required water level for a water treatment operator?Understanding fluorosis: how excess fluoride in drinking water affects teeth and healthWhat is a potential effect of excess fluoride in drinking water?What ambient means in the atmosphere and why it mattersWhat does the term 'ambient' refer to in relation to the atmosphere?Why chlorine cylinders can freeze: the impact of a high feed rate in water treatment systemsWhat is a possible reason for a single chlorine cylinder to freeze?

More practice questions

These questions are part of the practice quiz. Start practicing

What method is important to ensure safe water supply integrity?
What is defined as the relationship between the yield of a well and the amount of drawdown in the well?
What happens if the drawdown of a well increases?
At what temperature do fusible plugs typically melt?
Black water issues are typically associated with which problem?
What does MCL stand for in the context of water safety regulations?
What are small, one-celled animals such as amoebae and ciliates classified as?
What is a potential consequence of failing to conduct adequate sampling in a water system?
What is the primary property of turbidity that causes electro-chemical repulsion?
What is the primary usage of a gate valve in a distribution system?
What is the main source of atmospheric moisture that leads to precipitation?
Which type of polymer will attract positively charged turbidity particles?
What is the maximum contaminant level for Total Trihalomethanes in drinking water?
What conditions can lead to cavitation in a pump?
At what concentration is fluoride most effective for dental health?
What is a potential consequence of pump motor misalignment?
What is the recommended velocity for a rapid mixer in feet per second?
What is the recommended detention time for flash mixers in minutes?
What type of bacteria is commonly found in the environment and typically harmless?
How often must ground water systems sample for inorganic chemicals?
What is a common scale forming substance found in water?
What is often caused by closing a valve too quickly in a water system?
Which of the following is NOT considered part of the hydrosphere?
What is the action level for copper in drinking water?
Which information is typically found on a pump curve?
If the drawdown in a well has decreased and the motor amps are high, what is the most likely problem?
What type of filter is generally known for being more efficient due to rapid filtration rates?
How many years must radiological violation records be kept?
What is the maximum time allowed before lead and copper samples are taken after water has been stagnant?
Which meter type is composed of two meters that can read small and large flows?
Which type of valve is best suited for throttling flows?
At what temperature should samples be refrigerated in degrees Fahrenheit?
What is the maximum flow velocity for flash mixers in feet per second?
What is typically the main disadvantage of using chlorine gas in water treatment?
What branch of science deals with the properties and behavior of water?
During backwash, how much should the filter bed expand as a percentage?
What cycle describes the process of water being recycled between the earth and atmosphere?
What term describes organisms that can cause diseases?
What term defines the layer of loose material and rock that makes up the Earth's surface?
What types of tastes and odors can be effectively removed by aeration?
What is likely to cause quality issues in a groundwater system?
Why is fluoride commonly added to drinking water?
What is the main operating unit in a centrifugal pump?
Why is it important to ensure no outdoor faucet drips when taking samples?
What is the correct method to connect a motor to a pump?
What device is installed in a sedimentation basin to prevent floating solids?
To ensure a pump installation maintains a positive suction head, what is a key design consideration?
When filling a water main, what should the water velocity not exceed?
What issue may result if the backwash time is too short?
What is the maximum percentage of bacteriological samples that can be positive before violating drinking water standards?
Which of these contaminants requires specific testing as mandated by the SDWA?
What are the two primary sources of water?
Which of the following best describes a primary function of a butterfly valve?
How many milliliters of water are needed for a bacteriological sample?
Red water problems are primarily linked to which substance?
What process involves using low voltage current to concentrate corrosion on a sacrificial anode in a water tank?
Which primary contaminant is often added to water to prevent tooth decay?
What is the smallest unit of life that is classified as a prokaryotic organism?
What type of filtration system involves both gravity and pressure in its operation?
What type of electrical current is used in cathodic protection?
In the rapid mix process, what is the detention time in minutes?
What is the recommended detention time for a sedimentation basin?
Which of the following is a method to quantify turbidity levels in water?
What term describes a high-molecular-weight synthetic organic compound that forms ions when dissolved in water?
Which of the following best describes colloidal substances?
What phenomenon is indicated by abnormally high head loss on recently backwashed filters?
What are small gelatinous masses formed in a liquid during coagulation known as?
How many times heavier than air is chlorine gas?
What term describes minute organisms, either plant or animal, that are typically invisible to the naked eye?
What type of sample is specifically classified as a lead and copper sample?
How many days' worth of sequestering agent is recommended to keep iron from oxidizing?
How many milliliters are required for a chlorine sample?
What combines coagulation, flocculation, and sedimentation in a single unit?
What is the maximum temperature to maintain in a chlorine room to prevent cylinder rupturing from gas expansion?
What component is essential for protecting potable water from contamination during filling operations?
How many places must measurements be taken to check motor alignment?
How many hours do you have to report a radiological violation?
Which type of living organisms are classified as microscopic and consist of a single cell?
How many milliliters are needed for a pH sample?
What is a common indicator that a faucet may not be suitable for sampling?
What type of contaminant is Iron classified as?
What encompasses all forms of plant and animal life that live in water?
What can pump motor misalignment potentially damage?
What type of overflow rate in a sediment basin ensures proper settling?
Which term encompasses all the water present on Earth?
Gate valves typically have how many turns per inch?
What percentage of unaccounted water is considered excessive in a water system?
What structure supports the filter media and collects filtered water while distributing backwash water?
Which contaminant category includes lead and mercury?
In water treatment, what is the significance of filter breakthrough?
What term is used for water that is safe for human consumption?
What type of carbon should be added as far upstream of coagulation as possible?
What type of bottles are supplied with colilert testing kits?
A density measurement describes what property of a substance?
Which of the following is essential to monitor for optimal centrifugal pump performance?
What type of attachment is used to provide a sanitary seal between the well casing and the effluent line?
Which substance has a secondary maximum contaminant level (MCL)?
Cavitation can be temporarily corrected by throttling which valve?
What geological feature stores groundwater and is characterized by its porosity?
What are polyphosphates, including sodium hexametaphosphate, commonly used as?
Why is fluoride classified as an Inorganic Primary Contaminant?
How long should you flush the line before taking a sample?
Which type of water treatment system may require a holding tank for effective iron removal?
What term describes the standard water treatment process that includes coagulation, flocculation, sedimentation, filtration, and disinfection?
What is the solid crust of the earth known as?
Common sources of microbiological contamination in water include?
An excavation over how many feet deep must have a ladder for access?
What is produced as a result of breakpoint chlorination?
What is the usual chemical threshold for manganese in water systems?
What is a mechanical joint used for in cast iron valves and fittings?
What substance is recommended for treating a well for iron bacteria?
What effect does a worn meter have on water usage reading?
Public wells should be located a minimum of how many feet from potential pollution sources?
What is the smallest division that a substance can be broken down to without separating its individual atoms?
What scale is used in the Fahrenheit thermometer for boiling and freezing points?
Which process involves the loss of water vapor to the atmosphere from living plants?
How does the presence of cationic polymers affect water treatment processes?
During which week should compliance samples ideally be collected?
Which type of sample would NOT typically require a specific point of use?
Which of the following contaminants is specifically regulated due to its impact on public health?
How often should fluoride testing occur?
What is supplied to the stuffing box to lubricate and flush the packing or mechanical seal?
Which instrument is used to measure turbidity?
Repeat bacti samples must be collected within how many hours?
What surrounds iron and manganese particles preventing them from oxidizing?
In relation to water operators, what is the significance of sampling results?
What is a characteristic of hydrophilic particles in water treatment?
What is the maximum head loss allowed for a rapid sand filter?
What term describes substances that are water fearing, particularly in terms of turbidity?
What factor is used to determine the optimum dosage of fluoride?
Which chemical is often used in water treatment for the removal of iron and manganese?
What is the New Mexico Water Conservation Fee amount per 1000 gallons?
Which sampling type occurs at customers' plumbing fixtures?
What type of disinfection is known as secondary disinfection in water treatment?
Which treatment standard is associated with removing contaminants in drinking water?
Which of the following diseases is NOT directly associated with waterborne pathogens?
What is the minimum acceptable temperature for storing water samples?
What is the average detention time for the flocculation process?
How many feet must ladders extend above the trench?
What aspect of pipe design does the "C' Factor" represent in hydraulic computations?
What does the "C" factor represent in fluid dynamics?
What is the Maximum Contaminant Level (MCL) for Total Trihalomethanes in mg/l?
What term describes the water loss to the atmosphere from plants and surface bodies?
What samples should be representative of the water system?
What is the clear vertical distance between the top of the filter medium and the lowest outlet of the upper distribution system in a permanent media filter called?
What is an important consideration when adding fluoride to water systems?
Which of the following is NOT a waterborne pathogen commonly found in contaminated water?
What indicates the need for maintenance in a pump system?
Which type of polymer will attract negatively charged turbidity particles?
Which term refers to the weight per unit volume of a substance?
What term describes subsurface water that saturates geological formations?
What is the term for the initial movement of water from the earth's surface into the soil?
What is the temperature at which water freezes on the Celsius scale?
What should the backwash rate be for a rapid sand filter in gallons per minute per square foot?
What is the purpose of cathodic protection in water systems?
What is the best method for removing organic tastes and odors from water?
When must positive bacti resampling take place?
At what locations does compliance sampling typically occur in a drinking water system?
Ladders in a trench must be located no more than how many feet from workers?
How many compliance periods are there in the SDWA Compliance Cycle for Standardized Monitoring Rule?
In sedimentation basins, what is the purpose of baffles?
What process is commonly used to remove taste and odor problems from water?
In an uncovered storage tank, which organism is likely to grow?
What type of impurities do filtration systems primarily target?
Which acids are formed when chlorine reacts with water?
A trunk line in a large municipality should have an isolation valve every how many feet?
What effect does a water hammer have on water pipelines?
Regular testing of public water systems helps to ensure compliance with which standards?
What is typically the first step in determining the chlorine demand of water?
What is the primary function of an underdrain in a filtration system?
Which of the following describes a characteristic of potable water?
What is the purpose of fusible plugs in chlorine cylinders?
What is the primary role of cathodic protection in water systems?
Which type of contaminants includes synthetic organic chemicals?
Who must review and approve drinking water distribution system sampling plans?
What is the reporting time frame for chemical violations?
During evapotranspiration, water is primarily lost from which sources?
What is the main function of check valves in pumping systems?
If coliform bacteria are present in the water supply, what else may be present?
What is the agglomeration of colloidal particles after coagulation called?
What is considered the universal solvent?
Which fluoride compound is primarily used in municipal water treatment?
Which of the following is a common radiological contaminant?
What is a result of ineffective disinfection processes in water treatment?
What is the primary health concern related to turbidity in water treatment processes?
If bacteriological retakes are required, what is the minimum number of samples that must be submitted next month?
What term describes a submicroscopic organism that can pass through filters capable of removing bacteria?
How long should a rapid sand filter run time not exceed?
In what manner should microbiological samples be taken to ensure accuracy?
What compound is commonly used to locate chlorine leaks?
What is the term for the movement of water into and through the ground?
The DPD test is primarily used for what type of analysis?
Microbiological sampling may require moving locations for sampling due to what reason?
What is the purpose of using chloramines in drinking water treatment?
What is the term for the gases that form the Earth's atmosphere?
What process is referred to as the natural movement of water through the environment?
When should microbiological samples be collected aside from monitoring compliance?
Which component is essential to ensure a potable water system is effectively protected?
What is the reason for screening all vents and overflows on storage tanks?
How many people must a public water system serve to be classified under New Mexico regulations?
Which component in a diaphragm pump is known to cause significant maintenance issues?
A holding tank may be required if iron is removed by what method?
Which type of algae is most likely to bloom in a maintained water feature?
In what situation would an altitude valve be utilized?
What is Sodium Hypochlorite commonly used for?
What is the minimum velocity required to flush a distribution system?
What is the minimum residual pressure in a distribution system without public notification?
What legislation ensures public water systems treat water to meet quality standards?
What is the maximum pressure a centrifugal pump can generate called?
Filter media sand should be sized so that the grains are between which of the following diameters?
How should all vents and overflows on a storage tank be equipped?
Radiological contaminants are primarily derived from what sources?
What is a common application for a peristaltic pump?
What is the role of sedimentation in the conventional treatment process?
What protects against backsiphonage and backflow in a water system?
What is it called when dissimilar metals react with each other in an aqueous solution?
Bacteria, viruses, and protozoa fall under which type of contaminant?
What condition causes instrumentation to hunt for a setpoint?
For a 3-log removal requirement of Giardia Lamblia, what percentage of organisms can survive?
What term is used to describe the process that includes both evaporation and plant transpiration?
What is an important characteristic of gravity filters?
What term best describes the continuous recycling of Earth's renewable water supply?
Which two chemicals are commonly used as sources of fluoride?
What should be marked on the form when collecting special microbiological samples?
What term describes the combined vaporization of water from surfaces and plants?
Which measure is essential to prevent iron oxidation in water treatment?
Which process in water treatment involves the mixing of chemicals for flocculation reactions?
Which type of filter typically requires more backwashing to maintain function due to its design?
What is considered the best way to prevent cross-connection contamination in a water supply?
What additional equipment is needed to feed liquefied chlorine gas from a ton cylinder?
What type of valve is used when two storage tanks serving the same area have different overflow elevations?
Lead and copper samples should be taken from which of the following?
Who is defined as anyone responsible for the operation of all or any portion of a water supply system or wastewater facility?
To prevent chlorine gas from forming Chlorine Hydrate, what is the minimum temperature required in a chlorine room?
At what angle should the bottle be held while filling it for a sample?
What are the three parts of a site sampling plan?
Microbiological samples in drinking water systems are taken from where?
Which type of algae is known for causing clogging issues in filter beds?
What is the neutral pH value?
Why is it important to develop drinking water distribution system sampling plans?
What is the optimum concentration range of fluoride in water?
What type of contaminants does the term "MCL" refer to in public water systems?
How often should chlorine gas flexible feed tubes be replaced?
What is the primary issue associated with Trihalomethanes in drinking water?
Coliform bacteria are commonly found in which part of animals?
Which cycle is essential for the continuous movement of water in the environment?
What is a potential consequence of not properly managing backwash times?
Which measurement is crucial when determining the dosage of fluoride?
Which primary inorganic contaminant poses an immediate health risk?
What is the maximum allowable total chlorine residual in drinking water?
Which disinfectant is typically formed when ammonia is added to chlorine for water treatment?
From where are disinfection by-products samples collected?
Which tool is used for measuring shaft misalignment?
Which process involves the addition of a floc-forming chemical to water?
Within how many hours must a failure to comply with NM Drinking Water Regulations be reported to NMED?
Which form of fluoride is classified as liquid fluoride?
Which type of bottle is primarily reusable for sampling?
Which of the following describes a common issue caused by running a filter at too high a head loss?
What tool can be used to initially check coupling alignment?
How many feet should negative suction head not exceed to prevent potential issues?
Flocculation is primarily achieved through which method?
What can the presence of pathogens in water indicate?
Which of the following describes the chemical process of chlorination?
What are the byproducts formed when chlorine reacts with dissolved natural organic matter in drinking water?
Which of the following is a common result of low suction head in a pump?
In the context of water treatment, what does the term "floc" refer to?
What kind of life is defined as aquatic life?
What primary contaminant shields harmful bacteria from disinfection processes?
In the context of water supply, what is the effect of a clogged filter bed?
What do we call a porous, water-bearing geological formation?
In water systems, what is often the result of using chlorine for disinfection?
In plumbing systems, what component ensures the joint is tight and prevents leaks in cast iron pipes?
What features do snap lid bottles have?
What is the primary purpose of the New Mexico Water Conservation Fee?
What is the primary purpose of Nalgene bottles in sampling?
What is used to hold sand back and allow a larger well screen to be installed?
Which of the following should not be included in microbiological sample forms?
Which type of colloidal particles are referred to as water loving?
To which authority must SDWA sampling results be reported in New Mexico?
What is the common coagulant used in water treatment processes?
Which health risks are associated with the consumption of trihalomethanes?
What is the maximum contaminant level (MCL) for iron in water?
What term describes the distance from the well to the edge of the cone of depression?
What is the action level for lead in drinking water?
After how many hours should lead and copper samples be drawn from sites?
What chemical is commonly used to kill algae in lakes?
What can occur if a filter is run at too high of rate or for too long?
At what concentration does iron become problematic for water systems?
What is the main purpose of disinfection in water treatment?
Coagulation in water treatment results in the formation of what?
When selecting a sampling point, why should you avoid using certain faucets?
What type of treatment primarily focuses on removing smaller particles that may not settle by gravity alone?
What is a primary characteristic of microorganisms?
Chlorine is how many times heavier than water?
What is the result of pre-chlorination intended to remove tastes and odors?
What is the required retention period for chemical violation records?
What should be checked to protect potable water quality from contamination?
For how many years must chemical sampling results be kept?
What organization is primarily responsible for the regulations concerning drinking water quality in New Mexico?
Which of the following is NOT considered an inorganic contaminant?
What is the primary significance of the coliform group in water quality assessment?
What may happen if sludge is not removed frequently from a sediment basin?
What happens to a filter bed during backwashing if excessive pressure is applied?
If an excavation is over how many feet deep, shoring may be needed?
At what pressure must a distribution system be designed to comply with regulations?
For how many years must sanitary survey records be maintained?
What is the main purpose of the filtration process in water treatment?
Which treatment approach is effective for managing manganese problems?
What property of the fluid being pumped is critical for selecting a diaphragm pump?
What is needed for instrumentation to set up correctly downstream?
What is the regulation minimum design pressure in a distribution system?
Which contaminant category includes chemicals like herbicides and volatile organic chemicals?
What type of equipment is used to feed liquid fluoride or liquid chlorine?
Why is it important to take compliance samples at the beginning of the week?
What percentage of positive bacteriological samples can be allowed before a system is flagged?
Which process involves the combination of particles to form larger aggregates that settle?
What is one consequence of inadequate maintenance of a sediment basin?
What is a physical link between a potable water system and one of unknown quality?
Which factor is used in the Hazen and Williams equation to determine headloss in a pipe?
Which factor is least likely to affect the efficiency of a chemical feed pump?
What happens to the efficiency of a pump when cavitation occurs?
What potential problem occurs when dissolved gases are released in a filter bed?
What chemical is commonly used to kill algae in a lake?
Which of the following describes the term 'molecule'?
How high can a centrifugal pump theoretically push water in feet?
When does manganese become a concern for water systems based on its concentration?
What design feature helps to maintain the integrity of a filter under different loading conditions?
What type of reading might you expect from a faulty water meter?
Which component is located where the service is attached to the main?
Which factor is critical for the longevity of a pump system?
Which of the following is an integral component for sedimentation processes in water treatment?
What is the positive side of the cathodic protection system typically referred to?
What condition is referred to as "Blue Baby Syndrome" due to the presence of nitrates in the bloodstream?
What process refers to atmospheric moisture falling onto the Earth's surface?
How many hours are allowed to analyze bacti samples?
Which device is used to measure NTU's in water?
Which type of filter can be classified as a slow sand filter, rapid sand filter, or high rate filter?
What is the purpose of wear rings in a pump system?
What is a common reason to collect microbiological samples from newly installed water lines?
Which of the following is used to test chlorine levels in water?

Subscribe

Get the latest from Examzify

You can unsubscribe at any time. Read our privacy policy